Using a Scan Tool

Using a scan tool, go to the ABS live data screen and note all the sensors, data and what it's telling you

1. A/con Switch Off


2. BPP Off


3.Power Steering Pressure Off


4. MT/AT discrimination Off


5. Neutral/ Clutch Switch On


6. Refridgerant Press Switch Off


7. Trans Range (DLC) On


8. Ten Terminal (DLC) On


9. Cooling Fan Control (Hi) Off


Using the scan tool on the vehicle you have been assigned to. Go to the actuator test screen. Note below what component you have tested and what happened when you tested that component and the test results.



1. # of Continuous DTCS in modulator 3



2. ABS Valve CTRL Relay on



3. ABS warning lamp status off



4. BAT positive volt 14.69



5. Brake Switch In off



6. Hydraulic Pump Motor x2 off



7. LF ABS inlet valve off



8. LF ABS output valve off



9. LF Wheel Speed Sensor 0kmh



10. RF ABS inlet valve off

11. RF ABS Output Valve off

12. RL Wheel Speed Sensor 0kph

13. RR ABS output Valve off

14. RR Wheel Speed Sensor 0kph